As a number of you may have already known, I’d bought a U-Boat Flight deck CAS 50mm watch, which many around the forum stored saying was “Cheaply made” plus they felt the metal was cheap which the very was cheap.
I’d an entirely different experience and felt the situation machining was on component with anything within the cost range, which the only real part which was neglected was the conclusion from the movement. I’ll elaborate a little more here.
There’s an over-all shot from the U-Boat, atop the U-Boat box. As you can tell, the lines around the bezel are sharp and crisp, a sign of high-finish finishing techniques, usually performed partly manually. The strap however, while produced in Italia manually, is ugly. The perforated card inserts around the strap actually cheapen the general appearance of the timepiece, and that i immediately use it a StrapLuxe gray leather strap with whitened stitching which fits the timepiece perfect for me.
A detailed from the dial and you may begin to see the crisp lines from the bezel within this photo too. The dial lume is used thoroughly and precisely. Although this watch is created in Italia, I’ve without doubt that the standard from the painting around the dial can be the factors of similarly listed Swiss watches. As the overall type of the timepiece most likely doesn’t ooze class, it’s a well-crafted watch for me. The deposits are Azure, and also the situation steel is 316L, exactly the same type since many high-quality Swiss watches.
It had been told in my experience that the standard of the watch wasn’t any much better than the Nixon watches available. As I might accept this statement whether it were put on Hamilton watches or Swiss Military Victoriana situation finishing, I wouldn’t agree according to U-Boat. I’d put U-Boat steadily like Tag Heuer’s Carrera line for quality of finish.
The movement finish however is sorely missing, and less than the standard standards of even Tag Heuer. The U-Boat actions are certainly within the same quality range as Hamilton. The additional canteen hardware is extremely well machined making too, given an excellent feel when unscrewing and taking advantage of the canteen cover.
The Plain Jane Valjoux/ETA 7750 is seen around the caseback as possible seen, and it is mounted corrected for any left-crown configuration, an apparent necessity given how big crown and 50mm situation diameter. The timepiece is very heavy and doesn’t feel light because of its size for me.
Not observed in the photos may be the U-BOAT deeply engraved along the side of the situation, that is deeply sunken and bead basted within the deep parts, because of the situation an additional degree of finish. I bought this watch from the friend, once i had handled it and felt that the standard from the finish what food was in a suitable level. I’ve since offered this watch, mostly since i found the 50mm size a little bothersome. It can make the timepiece somewhat not practical for daily put on, and often the dimensions causes it to be look a little tacky IMO. This is actually the “mid-sized” U-boat, having a bigger 55mm size and more compact 43mm version available.
There’ s the proverbial wrist shot, installed on the stock strap and proven on my small 6 3/4″ wrist. Even though it is large, and somewhat saucer-as with appearance, it’s not entirely unthinkable, plus much more workable than I’d have thought 50mm could be. Now, the 55mm version could be totally unthinkable for me personally, but I saw a man by having an 8″ wrist pull a 55mm U-Boat off no problem…